MULTIPLE ROD HOLDER ADAPTOR BASE
Traxstech wants to grow with you so if you have rod holders already we can adapt.
If you own Big Jon pedestal mount holders they can now be fastened to our new 3” tall adaptor base that gives you the flexibility to slide them into our tracks for greater positioning, as always our base provides you the 45 degrees of side to side rotation so you can turn the entire set-up and point the rods out and back for better use when running planer boards.
*Fits all brand multiple rod holders with a 4” x 4” base and a mounting hole pattern of 3-1/4” square.
Standard Clear Textured
Finish
| Description |
Part # |
Price |
|
Multiple Rod Holder
Adaptor Base |
BJBA-3 |
$44.99 USD |
 |
Additional colors available in Black, & Gold.
Please e-mail info@traxstech.com to check availability and pricing. |
 |
PULLEY
RETRIEVER KIT
When using a planer board
mast system, this pulley slides on to the line allowing for retrieval.
This is an ideal safe way to add more clips to the planer board
line. Pulleys can also be used on downrigger's for retrieving the
cannon ball from water surface to boat. Molded from lexan, with
all stainless steel hardware, these pulleys will offer you a lifetime
of service.
Includes:
- one pulley
- one cleat
- 15' coil of rope
| Description |
Part
# |
Price |
|
| Pulley Retriever Kit |
RS-900-2 |
$18.99 USD |
|
|
|
PLANER
REEL REPLACEMENT LINE
150' of 200# Test line with Snap Swivel
| Description |
Part # |
Price |
|
Planer Reel
Replacement Line |
PRRL-150 |
$20.99 USD |
|
|
|
MOUNTING
TRACK END CAPS
All of our mounting tracks come with a
pre-drilled and tapped hole at each end for use with the pursuit
sports end caps. Keeping equipment secure from sliding out, to and
from your destination. For locking your equipment into any of our
mounting tracks, comes with stainless screws and allen wrench. Purchased
as a set.
Standard Clear Textured
Finish
| Description |
Part # |
Price |
|
| Track End Caps - 1 pair |
MTEC-2 |
$13.99 USD |
|
Colored Track
End Caps - 1 pair |
Colored
MTEC-2 |
$15.39 USD |
|
Additional colors available in Titanium, & Black.
Please e-mail info@traxstech.com to check availability and pricing. |
|
BLACK 2" DIA REPLACEMENT
CAPS - 2pk
An economy replacement cap to be used on all tube type rod holders that have a 2” dia. tube x 1/8” wall.
| Description |
Part # |
Price |
|
Black 2" Dia
Replacement Caps |
C-500-2 |
$7.49 USD |
|
|
|
KEEPER CAP WITH STRAPS
- 2pk
Our own design! Made from the most durable material to withstand the elements. These caps fit rod holders using a 2” dia. tube x 1/8” wall.
- They do not come off tube.
- Rod butts don’t wear thru.
- Keeper strap holds rod securely in holder.
- Sold in pairs
| Description |
Part # |
Price |
|
Keeper Cap
with Strap
- 2pk |
KC-500-2 |
$17.99 USD |
|
|
|
DOWNRIGGER BALL CADDY
Ball Caddy secures canon ball into track next to your downrigger!
-
Slides into any of our Tracks
- Molded Ball Caddy Bolted onto a starboard base.
- Excellent addition to your system.
| Description |
Part # |
Price |
|
| Downrigger Ball Caddy |
CB-140 |
$20.99 USD |
|
|
|
ROD
HOLDER ADAPTER PLATE
A-600-6 Adapter Plate - Allows other brand rod holders, such as, Cabela's, and Scotty,deck mounts and Down-East S-17 Salty, to be mounted and used in our track system.
To allow additional flexibility we have added the following mounting patterns:
- Tite-Loc 2" x 2" Mounting Base
- Luhr-Jensen Speed Indicator mounting base
- Vectors Single, Double and Triple rod holders
Adapter plate comes with stainless steel hardware and thumbscrews
Standard Clear Textured
Finish
| Description |
Part # |
Price |
|
| Adapter Plate |
A-600-6 |
$24.99 USD |
|
Additional colors available
in Titanium, & Black.
Please e-mail info@traxstech.com to check availability and pricing. |
|
ADJUSTABLE POSITION
CLEAT
Adjustable Position Cleat (CP-04) great for attaching an extra boat
fender or dock line.
- 4" or 6" Chrome Plated Zinc Cleat
- 6" Long Aluminum Base
- Slides into any of our Tracks
Standard Clear Textured Finish
| Description |
Part # |
Price |
|
| 4" Adjustable Position
Cleat |
CP-04 |
$25.99 USD |
|
| 6" Adjustable Position
Cleat |
CP-06 |
$29.99 USD |
|
|
CP-04
CP-06
|
UNIVERSAL BRACKET
This bracket was designed to clamp or bolt
hand liner reels to, helping protect the boats exterior. River trollers
find it easier to fish with the reel hanging securely over the side
of the boat, when not using the bracket simply slides out of the
track. The bracket has since been used for many other mounting options
including downrigger's on small boats, barbeque grills, lanterns,
fish finders and aqua views just to name a few.
The bracket measures 3" tall and 12" arm.
Standard Clear Textured
Finish
| Description |
Part
# |
Price |
|
| Universal Bracket |
RWL-100 |
$59.99 USD |
|
Universal Bracket
with
Kachman Reel
for River Fishing |
RWL-100-2 |
$239.99 USD |
|
Additional colors available
in Titanium, & Black.
Please e-mail info@traxstech.com to check availability and pricing. |
|
THUMB
SCREWS
New star design allows better finger grip
for tightening or loosening, this design also has an opening in
the top of the Star for dropping an allen wrench into and tightening
directly on the stainless steel screw. Made from super tough nylon
with 1/4 - 20 x 3/4" long stainless steel screw. Package quantity
of 4
| Description |
Part # |
Price |
|
| Thumb
Screws |
T-520-4 |
$7.99 USD |
|
|
|
NET
HOLDER
Looking to get your net off the floor? Our
Straight Mount Net Holder will do the job, with its all aluminum
construction. This net holder offers an impressive 11" of height
for securing long nets.
The new and improved Traxstech net holder is welded at the top
and bottom of its 1/2" thick x 4 1/2" long base for strength
and rigidity.
Standard Clear Textured
Finish
| Description |
Part # |
Price |
|
| Net Holder |
RRH-200 |
$37.99 USD |
|
Additional colors available
in Titanium, & Black.
Please e-mail info@traxstech.com to check availability and pricing. |
|
C-CLAMP
MOUNTING BASE
This unit offers many unique features. It can be purchased in three variations and two different heights for maximum flexibility.
- The height of this unit allows for the rod tips to be right next to the boat (in the water) while musky fishing.
- Keeps the rod handle waist height when laid flat out to the side trolling divers, fish disks or flat lining.
- Will keep the butt of the rod closer (out of the way) to your gunwale if pointing the rod tips toward the sky while using with planer boards.
- The oval base provides 45 degrees of side to side rotation
- All aluminum heavy duty construction
Standard Clear Textured
Finish
Additional colors available
in Titanium, & Black.
Please e-mail info@traxstech.com to check availability and pricing. |
|
RRH-400-17 |
A-600-617 |
RRH-400-10 |
| |
RRH-400T-17 |
DM-375 / DM-500 LIVE
BAIT FISHING
Using driftmaster type rod holders. This plate will allow you to
mount a threaded 3/8" dia rod or 1/2" dia rod to it and
slide into the track to position these rod holders in any location
you would like, without drilling each one in a specific location.
They can be removed or relocated by tightening the thumb screw.
Standard Clear Textured Finish
| Description |
Part # |
Price |
|
Live Bait
Fishing
3/8" dia rod adapter
plate only |
DM-375 |
$9.99 USD |
|
Live Bait Fishing
1/2" dia rod adapter
plate only |
DM-500 |
$9.99 USD |
|
|
DM-375 / DM-500
|
Tool and Beverage Holder
Standard Clear Textured Finish
| Description |
Part # |
Price |
|
| Tool Holder / Beverage Holder combo to fit in Traxstech track |
TH-100 Combo |
$69.99 USD |
|
| Tool Holder only to fit in Traxstech track |
TH-100 |
$49.99 USD |
|
| Single Beverage Holder to fit in Traxstech track |
BH-100 |
$25.99 USD |
|
| Beverage Holder to fit on Tool holder and Vertical bird tree |
BH-100V |
$27.99 USD |
|
| Beverage Holder to fit on sport track like mounts already on boat |
BH-100TBM |
$32.99 USD |
|
|
TH-100 Combo
|
| |
BH-100 |
TH-100
|
BIMINI TOP PLATE
This compact mounting plate has two hole patterns drilled & tapped to allow your bimini top bracket to be removed from your boat. This allows you to mount a longer piece of track and still use your bimini top, but now the bracket can slide into our track.
* Currently drilled for two of the most popular brackets
Standard Clear Textured Finish
| Description |
Part # |
Price |
|
| Luhr Jensen speed adapter plate also for bimini tops to slide into track |
LSA-100 |
$12.00 USD |
|
|
LSA-100
(bimini top bracket
not included)
LSA-100
(bimini top bracket
not included)
|
BALL MOUNT ADAPTER PLATE
This adapter plate features a 1/2" thick x 4-1/2" long aluminum base with two mounting patterns drilled & tapped. One accommodates the Ram® electronics ball mount and the other accepts your adjustable antenna bracket so you can slide your antenna assembly right into our track.
Standard Clear Textured Finish
| Description |
Part # |
Price |
|
| Adapter plate for ball mount and antenna bracket |
A-450 |
$19.99 USD |
|
|
A-450
(mount not included) |
GRILLS
At Traxstech we like to grill what we catch as much as the next angler, with that said we will offer you 3 great grills with many mounting options.
- Kuuma Grills are made from Stainless Steel.
- Each grill has a connected lid, removable grate for easy cleaning and drip tray.
- Runs off one pound propane bottle or you can connect to a larger tank with proper hose.
- Grill attaches to Traxstech universal bracket facing either direction.
- Universal bracket allows grill to slide in and out of any Traxstech Track
- Customer ideas:
- Boats
- Gimbal mounts
- Picnic tables
- Railings
- Porch/Deck
- Pontoon boats
- Sail boats
- Dock
- Even tailgates!!
| Description |
Part # |
Price |
|
| Grill small round with mounting bracket to fit in track |
TGR-SC-100 |
$239.99 USD |
|
| Grill medium rectangle with mounting bracket to fit in track |
TGR-125 |
$269.99 USD |
|
| Grill large rectangle with mounting bracket to fit in track |
TGR-160 |
$299.99 USD |
|
| Bracket only for small round grill |
RWL-100-GRM |
$79.99 USD |
|
| Bracket only for Medium or Large grill |
RWL-100 |
$59.99 USD |
|
|
TGR-SC-100
TGR-160
TGR-125
|
 |
|
